Acronis True Image Home 2010-Mini-Box TIHPB2ENS1 Manuale Utente
Codici prodotto
TIHPB2ENS1
104
Copyright © Acronis, Inc., 2000-2009
3. Click the My Disks link below Recover on the Welcome screen to start the Recovery Wizard and
then choose the image of the system disk for recovery. As drive letters in the standalone Acronis
True Image Home may differ from the way Windows identifies drives, you may need to specify
the path to the image file by clicking Browse and selecting the disk and folder that stores the
image.
True Image Home may differ from the way Windows identifies drives, you may need to specify
the path to the image file by clicking Browse and selecting the disk and folder that stores the
image.
4. Choose Recover whole disks and partitions and select the Use Acronis Universal Restore box.
5. If the target hardware has a specific mass storage controller (such as an SCSI, RAID, or Fibre
Channel adapter) for the hard disk(s), specify where to find the driver(s) for the specific hardware
at the Drivers manager step. If the driver(s) is stored on a diskette or CD, select the Search
removable media for device drivers box. If some drivers are stored on a local hard disk or a
network share, select the Search for device drivers in the following locations box (when it is not
selected by default), and specify the path to the driver(s) after clicking Add Search Path.
When the both boxes are selected at this step, Acronis Universal Restore will use three sources
for drivers:
- the removable media;
- the drivers storage folder(s) specified at this step; and
- the Windows default driver storage folders (in the image being restored).
The program will find the most suitable of all available drivers and install them into the restored
system.
at the Drivers manager step. If the driver(s) is stored on a diskette or CD, select the Search
removable media for device drivers box. If some drivers are stored on a local hard disk or a
network share, select the Search for device drivers in the following locations box (when it is not
selected by default), and specify the path to the driver(s) after clicking Add Search Path.
When the both boxes are selected at this step, Acronis Universal Restore will use three sources
for drivers:
- the removable media;
- the drivers storage folder(s) specified at this step; and
- the Windows default driver storage folders (in the image being restored).
The program will find the most suitable of all available drivers and install them into the restored
system.
6. At the What to recover step select the system partition, then specify the settings for the target
partition (new system partition). Make sure that the partition type is primary and active. Usually
you do not need to change the partition size which will be assigned automatically.
you do not need to change the partition size which will be assigned automatically.
7. Carefully read the summary of operations at the Finish step. If you do not want to validate the
backup, click Proceed, otherwise click Options on the sidevar and select the "Validate backup
archive before recovery" box before clicking Proceed.
archive before recovery" box before clicking Proceed.
During restore the program may be unable to find some driver(s) in the specified folders and display
an error message(s). In such case you can click Ignore to continue restoration or Cancel to cancel the
process, then try to find the required driver and repeat restore.
an error message(s). In such case you can click Ignore to continue restoration or Cancel to cancel the
process, then try to find the required driver and repeat restore.
After successfully restoring the system partition, exit Acronis True Image Home, enter the BIOS, make
the system hard disk the first boot device and boot to the restored Windows.
the system hard disk the first boot device and boot to the restored Windows.
During the first booting Windows will display numerous "Found new hardware" pop-up messages and
will then ask you to reboot the computer.
will then ask you to reboot the computer.
If you use Acronis Universal Restore for restoring a backup of multiboot configuration with two or
more editions of Windows, the most critical drivers will be replaced for all Windows installations.
more editions of Windows, the most critical drivers will be replaced for all Windows installations.