Milan e-tbt-hb-0402 Guida Specifiche

8

7

NOTE:  0402 Ethernet Pocket Hub Link Integrity cannot be
disabled. All devices connected to the Pocket Hub MUST have
link functions enabled.  

To install the 0402 Ethernet Pocket Hub:

•  Unpack the 0402 Pocket Hub.
•

Connect 10BaseT Cable to the 0402 Pocket Hub.

•

Connect the 0402 Pocket Hub to power.

Direction is provided in the pages that follow.

The 0402 Ethernet Pocket Hub packing contents should include the
following:

0402 Pocket Hub

E-TBT-HB-0402

Power Supply Adapter

3518, 3517, 3516, 3515, or 3514, 

(depending upon power configuration 
in country where installed)

User’s Guide

7349

To connect 10BaseT Cable to Pocket Hub RJ-45 connectors:

1. Locate or build 10BaseT cables with the following

characteristics:
•

803.2 compliant (See page 14)

•

correct (straight through or crossover) cable configuration

for site installation (See page 7)

•

male RJ-45 plug connectors installed at both ends of

cable.

2. Connect male RJ-45 plug connector at one end of 10BaseT

cable to Pocket Hub RJ-45 jack connector.

3. Connect male RJ-45 plug connector at other end of 10BaseT

cable to DTE terminal RJ-45 jack connector (using straight
through cable orientation) or to Pocket Hub RJ-45 jack
connector (using crossover cable orientation).

Use a crossover cable to connect Pocket Hub to the wall plate.
Use a straight through cable to connect Pocket Hub to terminal
devices.

wall plate

#1

networks

TRANSITION

Straight-through 10BaseT

Crossover 10BaseT