Atlas Sound FAP42T Volantino
AtlasSound.com
AtlasSound.com
800.876.3333
53
Four
Switched WhisperTouch
™
Impedance Matching Volume Controls
Switched WhisperTouch volume controls provide clear, distortion-free music reproduction for commercial distributed
systems or "Whole House" audio designs.
systems or "Whole House" audio designs.
These volume controls feature impedance-matching (8 Ω versions only) to protect the amplifier and balance the audio
signal, fine-tune level control to adjust low listening levels to the perfect setting, and an easy-grip, low profile knob.
The knob features smooth detents and make-before-break contacts for smooth transition when changing volume
settings. Attenuation is accomplished in 10 steps. All models have frequency response of 20 Hz – 20 kHz (-3 dB, +0).
signal, fine-tune level control to adjust low listening levels to the perfect setting, and an easy-grip, low profile knob.
The knob features smooth detents and make-before-break contacts for smooth transition when changing volume
settings. Attenuation is accomplished in 10 steps. All models have frequency response of 20 Hz – 20 kHz (-3 dB, +0).
Units include an on / off switch and indicator light. An internal "smart" relay switch automatically puts speakers
into "stand by" mode making them "available" rather than indiscriminately active when the audio system is pow-
ered on. Simply touching the switch accesses audio. A modest sized indicator light provides quick visual status
– (green=standby, red=active) Models require a separate 18-gauge, 2 conductor stranded cable to power the
internal relay in addition to the loudspeaker cable. An external power supply,
into "stand by" mode making them "available" rather than indiscriminately active when the audio system is pow-
ered on. Simply touching the switch accesses audio. A modest sized indicator light provides quick visual status
– (green=standby, red=active) Models require a separate 18-gauge, 2 conductor stranded cable to power the
internal relay in addition to the loudspeaker cable. An external power supply,
PS-M12
, is recommended for 1–3
WhisperTouch units, or
PS24-20
(See Page 64) for up to 18 units.
For installation, either a backless E.O. box or sealed box with 18 or 20 in
3
volume (Carlon
®
B120A or equivalent)
is required. Standard or Decora plate styles and available colors vary by model – see chart for details. Decora trim
plates not included.
plates not included.
Model
Series
Impedance
Voltage
Power
Rating
Plate
Style
Type
Requires
Attenuation
DWS-8(I/W)
8 Ω
—
50 watts
Decora
Stereo, Switched
20 in
3
E.O. Box
& Power Supply
10 Steps,
22.5 dB Total
22.5 dB Total
SWS-8I
8 Ω
—
50 watts
Standard
Stereo, Switched
DWSM-15(I/W)
—
70.7V
15 watts
Decora
Mono, Switched
18 in
3
E.O.Box
& Power Supply
SWS-15W
—
70.7V
15 watts
Standard
Stereo, Switched
DSUMS-8W
8 Ω
—
25 watts
Decora
Left, Right, Summing Switched
20 in
3
E.O. Box
& Power Supply
SSUMS-8I
8 Ω
—
25 watts
Standard
Left, Right, Summing Switched
Power Supplies for Switched WhisperTouch
PS-M12
Unit is a compact UL-listed 12VDC, 300 mA power supply with a 6' cord. The required input voltage is
120V. Supply includes a
1
⁄
8
" mini-plug for direct connection to the
M-1CB4
connector block (powers up to four
F-1
flashers) or for use with up to three Switched WhisperTouch
™
volume controls.
Model
Powers Up To
Input
Output (Nom.)
PS-M12
3 Switched WhisperTouch
120VAC
12VDC @ 300 mA
DAT Series
Atlas Sound offers traditional autoformer controls to provide excellent stereo performance and maxi-
mum speaker-handling capability. Models include positive off and full-power pass through at the maximum setting.
Contacts are make-before-break for smooth transition. Models with 8 Ω impedance are suitable for residential stereo
and voice-coil circuit application. Models for 25V or 70.7V use provide level control in distributed constant-voltage
systems. Single-gang models mount standard E.O. boxes 2
Contacts are make-before-break for smooth transition. Models with 8 Ω impedance are suitable for residential stereo
and voice-coil circuit application. Models for 25V or 70.7V use provide level control in distributed constant-voltage
systems. Single-gang models mount standard E.O. boxes 2
1
⁄
2
" deep. Includes both white and ivory knobs, inserts and
trim plates.
• Choose
DAT8ST
to Control Speaker Volume when Impedance Matching is Not Necessary Such as Single-pair
Installations or when Multi-channel Amplifiers are Used for Individual Zones. Combine
DAT8ST
with a Separate
Impedance-Matching Switching Device (AST Series) to Design a System with Multiple Loudspeaker Pairs.
• Choose
DAT35ST70
for Control of Distributed Stereo Zones in 25V / 70.7V Systems.
Model
Series
Power
Rating
RMS / Channel
System
Attenuation
Insertion
Loss
Plate
Size
Impedance
Voltage
Per Step
Total
DAT8ST (I/W)
50 watts
8 Ω
—
3 dB*
30 dB
.5 dB
1 gang
DAT35ST70 (I/W)
35 watts
—
25V or 70.7V
3 dB**
27 dB
.5 dB
1 gang
* Models have two steps of 6 dB before off. Note: Attenuation curve is steeper for a 25V line.
** Models have one step of 6 dB before off.
Note: Decora
** Models have one step of 6 dB before off.
Note: Decora
®
is a Registered Trademark of Leviton Corporation.
Atlas Sound WhisperTouch
®
Volume Controls
DWT / DSUM Series
(Shown with cover plate)
Commercial Stereo Attenuators
DAT8ST
DAT35ST70