Focus dr-dv5000 Nota Di Rilascio
Focus Enhancements FireStore DR-DV5000
FIRMWARE RELEASE NOTES
FIRMWARE VERSION 1.3.2
Thank you for downloading the latest version of firmware for the
FireStore DR-
DV5000 DTE
disk recorder. Focus Enhancements recommends that you update to this
latest
version of
firmware if you are presently using a version older than what is noted
above. To
display
the current software version, turn on your DR-DV5000 unit, select MENU
and scroll
down to OS
VERSION NO. Pressing SEL will display the current version.
IN ORDER TO DOWNLOAD THIS FIRMWARE, YOU WILL REQUIRE THE
FOLLOWING:
1) Windows 98SE, ME, 2000, XP or Macintosh OS9.1 or later computer
system with an
active OHCI compliant FireWire (IEEE-1394) port.
2) Focus Enhancements FireStore DR-DV5000 DV Disk Recorder
3) Focus Enhancements FSHDD-1 FireWire disk drive or other FAT32
formatted
FireWire disk drive.
4) 6-pin to 6-pin FireWire (IEEE-1394) connector.
5) Copy of Release Notes available.
FIRMWARE INSTALLATION INSTRUCTIONS:
To install new firmware to DR-DV5000, do the following:
1) Download software from the Focus Enhancements website
(http://www.focusinfo.com/support/updates.htm) to your FireWire
equipped computer
system (see requirements above).
2) Unzip file using WinZip (Windows) or Stuffit (Macintosh) on a
computer system.
3) Once downloaded and unzipped, rename the file called "XXXX.bin" to
"fs3.bin"
(please ensure that spelling, punctuation and case is the same as
listed).
4) Connect a FireWire disk drive that has been used with DR-DV5000 (or
other FAT32
formatted
drive) to the computer and copy over the file "fs3.bin".
5) Disconnect the FireWire drive from the computer (ensure to properly
dismount
the
drive first), and connect to DR-DV5000. Power on DR-DV5000 as per
normal.
6) Enter the DR-DV5000 menu and select "SETUP". From the SETUP menu,
select "OS
UPGRADE".
FIRMWARE RELEASE NOTES
FIRMWARE VERSION 1.3.2
Thank you for downloading the latest version of firmware for the
FireStore DR-
DV5000 DTE
disk recorder. Focus Enhancements recommends that you update to this
latest
version of
firmware if you are presently using a version older than what is noted
above. To
display
the current software version, turn on your DR-DV5000 unit, select MENU
and scroll
down to OS
VERSION NO. Pressing SEL will display the current version.
IN ORDER TO DOWNLOAD THIS FIRMWARE, YOU WILL REQUIRE THE
FOLLOWING:
1) Windows 98SE, ME, 2000, XP or Macintosh OS9.1 or later computer
system with an
active OHCI compliant FireWire (IEEE-1394) port.
2) Focus Enhancements FireStore DR-DV5000 DV Disk Recorder
3) Focus Enhancements FSHDD-1 FireWire disk drive or other FAT32
formatted
FireWire disk drive.
4) 6-pin to 6-pin FireWire (IEEE-1394) connector.
5) Copy of Release Notes available.
FIRMWARE INSTALLATION INSTRUCTIONS:
To install new firmware to DR-DV5000, do the following:
1) Download software from the Focus Enhancements website
(http://www.focusinfo.com/support/updates.htm) to your FireWire
equipped computer
system (see requirements above).
2) Unzip file using WinZip (Windows) or Stuffit (Macintosh) on a
computer system.
3) Once downloaded and unzipped, rename the file called "XXXX.bin" to
"fs3.bin"
(please ensure that spelling, punctuation and case is the same as
listed).
4) Connect a FireWire disk drive that has been used with DR-DV5000 (or
other FAT32
formatted
drive) to the computer and copy over the file "fs3.bin".
5) Disconnect the FireWire drive from the computer (ensure to properly
dismount
the
drive first), and connect to DR-DV5000. Power on DR-DV5000 as per
normal.
6) Enter the DR-DV5000 menu and select "SETUP". From the SETUP menu,
select "OS
UPGRADE".