Cobra 36st Guida Al Funzionamento

Insert (10) new “AA” Alkaline or NiCad bat-
teries (not provided) into the battery cham-
ber. 
To install batteries, (1) remove the battery
chamber cover from the unit. (2) Install the
batteries according to the polarity markings
provided on the chamber. Note: Incorrect
battery installation can damage the batter-
ies and chamber. (3) Return battery cham-
ber cover.

Alkaline batteries:
Top grade Alkaline batteries 
should be used.

Rotate the power ON-OFF
Volume Control clockwise.

Open the squelch by fully turn-
ing counterclockwise 
and adjust the volume to 
a comfortable level.

Think of your squelch control 
as a gate for incoming signals. 
If you turn the squelch control
fully clockwise, you effectively
close the “gate” and no signals
will pass through. If you turn 
the squelch control fully counter-
clockwise, you 
open the gate and all 
signals come through.

To achieve the Desired Squelch
Setting (DSS), turn the squelch
control counterclockwise until
you just hear noise. Then turn the
squelch control back clockwise
just until the noise stops. This
DSS setting only lets strong sig-
nals through. 

Attach antenna securely
by turning clockwise.

**See Accessories 

on page 22 
for rechargeable
battery pack option.

+

–

+

–

+

–

+

–

+

–

+

–

+

–

+

–

+

–

+

–

Nickel Cadmium (NiCad) Batteries:
Batteries with 700 mAh minimum recom-
mended. Top Grade NiCad batteries can
be ordered direct from Cobra. See page
22 for details.