Runco VX-6000D Guida Utente
Runco VX-6000d Installation/Operation Manual
73
L
IMINAR
Y
MPEG NR: Select MPEG NR from the Picture Adjust menu to reduce or eliminate
so-called “mosquito noise” in MPEG-compressed video signals (digital broadcasts or
DVDs). Set it to Off, 1, 2 or 3, as needed to minimize distortion around the edges of
moving objects, moving artifacts around edges and/or blotchy noise patterns
superimposed over the objects.
so-called “mosquito noise” in MPEG-compressed video signals (digital broadcasts or
DVDs). Set it to Off, 1, 2 or 3, as needed to minimize distortion around the edges of
moving objects, moving artifacts around edges and/or blotchy noise patterns
superimposed over the objects.
Sharpness Enhancement: select Sharpness Enhancement from the Advanced Picture
Adjust menu to apply edge enhancement to images, giving the impression of added
depth. Set it to Off, 1, 2, or 3 as desired.
Adjust menu to apply edge enhancement to images, giving the impression of added
depth. Set it to Off, 1, 2, or 3 as desired.
Automatic Contrast: The VX-6000d can dynamically adjust the contrast (white level)
according to the color content in the signal, to produce the best picture quality. Select
Automatic Contrast from the Picture Adjust menu to activate this feature. Set it to Off, 1, 2,
or 3 as desired. Selecting “3” results in a higher average white level than the other
settings.
according to the color content in the signal, to produce the best picture quality. Select
Automatic Contrast from the Picture Adjust menu to activate this feature. Set it to Off, 1, 2,
or 3 as desired. Selecting “3” results in a higher average white level than the other
settings.
Reset to Defaults: To reset all picture quality settings for the current input to their
factory-default values, select Reset to Defaults from the Picture menu.
factory-default values, select Reset to Defaults from the Picture menu.
The VX-6000d provides nine adjustable white balance parameters, allowing precise
adjustment of the intensity of the red, blue and green color components in the dark areas
(Offset), light areas (Gain) and “mid-tone” areas (Gamma).
adjustment of the intensity of the red, blue and green color components in the dark areas
(Offset), light areas (Gain) and “mid-tone” areas (Gamma).
You can adjust these parameters as needed and store them in any of six presets (memory
locations). The selected white balance preset can, in turn, be associated with a “Picture
Memory“ preset (refer to White Balance on page 70). The most logical way to do this is
to associate a white balance preset with the picture memory preset of the same name;
however, you can associate a white balance preset with any picture memory preset.
locations). The selected white balance preset can, in turn, be associated with a “Picture
Memory“ preset (refer to White Balance on page 70). The most logical way to do this is
to associate a white balance preset with the picture memory preset of the same name;
however, you can associate a white balance preset with any picture memory preset.
Mem. Select: To select and edit a white balance preset, select Mem. Select from the
White Balance menu.
White Balance menu.
Reset to Defaults: To reset the Gamma, Gain and Offset settings for the
currently-selected white balance preset to their factory-default values, select Reset to
Defaults from the White Balance menu. Then, select Yes to confirm the reset.
currently-selected white balance preset to their factory-default values, select Reset to
Defaults from the White Balance menu. Then, select Yes to confirm the reset.
Mem. Select
4
Gamma
Red Gamma
0
Green Gamma
0
Blue Gamma
0
Gain
Red Gain
0
Green Gain
0
Blue Gain
0
Offset
Red Offset
0
Green Offset
0
Blue Offset
0
Reset to Defaults
White Balance