Garmin 531 Guida Utente

Where To?

1.  From any chart except the Fish Eye 3D, select 

 > 

> 

 > 

.

2.  Select either the time the current track began (or 

, if 

shown) or 

.

3.  To name the track, change the color of the track, or save it as a 

route, select 

.

  From any chart except the Fish Eye 3D, select 

 > 

> 

> 

. 

The track memory is cleared and the current track continues to 

be recorded.

1.  From any chart except the Fish Eye 3D, select 

 > 

> 

> 

.

2.  Select either the time the current track began or 

.

3.  Follow the colored line on the screen.
To edit or delete a saved track:

1.  From any chart except the Fish Eye 3D, select 

 > 

> 

.

2.  Select the track you want to edit or delete.
3.  Select 

 to change the name or color of the track, or 

select 

 to delete the track.

  From any chart except the Fish Eye 3D, select 

 > 

> 

> 

.

Record Mode—select 

, 

, or 

.

Off—does not record a track log.
fill—records a track log until the track memory is full.
wrap—continuously records the track log, replacing the oldest 

track data with new data.

Record interval—defines the frequency at which the track plot is 

recorded. Recording more-frequent plots is more accurate but fills 

the track log faster.

interval—sets whether the interval is determined by distance, 

time, or resolution. (Select 

 to set the value.)

distance—records the track based on a distance between points.
Time—records the track based on a time interval.
Resolution—records the track plot based on a variance from 

your course. This setting is recommended for the most-efficient 

use of memory. The distance value (Change) is the maximum 

error allowed from the true course before recording a track point.
Change—sets the value of the interval.

Track Color—sets the color of the track plot.