Garmin 340c Manuale Proprietario

I

NSTALLING

 

THE

 F

ISHFINDER

 340C > 

S

ELECTING

 

A

 L

OCATION

 

FOR

 

THE

 F

ISHFINDER

To ensure the successful operation of your Fishfinder 340C, you 

must properly install the Fishfinder and all of its related parts.

1.  Select a proper location for the Fishfinder.
2.  Mount the Fishfinder.
3.  Install your transducer.
4.  Connect to your power source.
5.  Test the installation.

Each of these steps is described in detail in the following sections.

Consider the following when you select an installation location: 

•  Provides optimal viewing as you operate your vessel.
•  Allows easy access to the unit’s keypad.
•  Is strong enough to support the weight of the Fishfinder and 

protect it from excessive vibration or shock.

•  Allows room for the routing and connection of the power/

data and transducer cables. There should be at least a 3-inch 

(8 cm) clearance behind the case. 

DO NOT mount the unit in an area that is exposed to extreme 

temperature conditions.

  NOTE: The temperature range for the Fishfinder 340C is 5°F 

to 131°F (-15°C to 55°C). Extended exposure to temperatures 

exceeding this range (in storage or operating conditions) may 

cause failure of the LCD screen. This type of failure and related 

consequences are NOT covered by the manufacturer’s limited 

warranty.

To get the best possible performance from your Fishfinder 340C:

•  Read the instructions first, and then follow the instructions to 

install the unit.

•  Gather the appropriate fasteners and tools.
•  Verify that all cables can reach the unit mounting location 

and the transducer.

•  Wear safety goggles and a dust mask when drilling, cutting, 

or sanding.