Garmin cf que 1620 Guida All'Installazione Rapida

© Copyright 2004 Garmin Ltd. or its subsidiaries

Garmin International, Inc.

1200 East 151

st

 Street, Olathe, Kansas  66062, U.S.A.

Part Number 190-00280-01 Rev. A

Once you have selected a destination and calculated a route, you 
can modify the route, preview turns, and save it for later reuse. 

1. Tap the Routes icon on the Map Page tool bar to display the  
  Routes Page. Then tap the desired Routes Option icon. 

2. Tap the Turns Page to view a list of turns for the route. Tap a  
  turn entry to preview the turn on the map.

3. Tap Recalculate if you have left the route and want to calculate  
  from your current location.

4.  Tap the Detour icon if you want to detour the route around a  
  traffi c jam or road construction.

5. Tap the Stop Navigation icon if you want to quit the route.

6. Tap the Route Preferences icon if you want to change the way a route is managed in order to  
  meet your personal requirements.

7. Tap Edit Vias if you want to add some new points to alter your route. 

8. Tap Saved Routes if you want to save the current route or view a previously saved route.

9. Tap Speak if you want to listen to current route status voice prompts.

(For faster acquisition, set the Pocket PC’s clock before starting the Que Application) 

1.  Turn On the application by tapping the Garmin Que 
   icon from the Program Page or the Start Menu. 
2.  Observe the Map Page and the GPS status messages as  
  they appear at the top of the page.
  •  “No GPS Connected”- you have not installed the cf  
    Que fully into the CompactFlash card slot.
   • “Waiting for GPS” - the Que application is making  
    contact with the cf Que module.
   •  “Acquiring Satellites” - the cf Que is search for satellites.
  • “2D GPS Location” - the cf Que has a fi x on enough  
    satellites to establish its location.
   • “3D GPS Location” - enough satellites are fi xed to  
    determine an elevation as well as ground location.
  If the cf Que can’t get past the “Acquiring Satellites” 
message, move to a location where you have a clear view of 
the sky.  Adjust the cf Que antenna to more of a horizontal 
position. If you get an intermittent “Lost Satellite Signal” 
message, move away from objects blocking the signal.
  If you’re starting up for the fi rst time or you have moved 
over 600 miles since last use, it must initialize (determine its 
location by searching for satellites over your current loca-
tion). Use the Location option from the GPS Info Page Menu 
to mark your approximate location so it knows to look only 
for satellites that are overhead.
  Once you begin to move, the message fi eld displays your 
direction of travel or the next street intersection ahead. 

Current Location

Next Street 

Ahead

Using the Find Feature:  
1. Tap the Find icon on the Map Page tool bar to display the Find Menu.
2.  Then select a category icon and tap it to open the search list.  To  
  narrow the list of items, tap the second fi eld to display the list of  
  search options. Choose “Near Current Location”. 
3.  To shorten the list even more, tap the category fi eld to display  
  a list of sub-categories to refi ne the type of map item you are  
 searching 

for.

3.  To further shorten the search, enter a key word in the name of the  
  item you are searching for in the “Name” or “Containing” fi eld. 
4.  Select the desired destination and tap to highlight it. Then tap the  

Routes icon at bottom of the page to begin route calculation.  

  From the pop-up options window, select the calculation prefer-  
  ence and then tap OK to complete route calculation. 
5.  When complete the route will be displayed on the Map Page  
  along with navigation instructions and voice prompts.

Food and Drink Sub-Categories

Food and Drink  Map Data Items

Navigating a Route on the Map

Find Menu Categories Icons

cf Q QS Review Format.indd   1

2/26/2004, 4:13:05 PM