Garmin 220 Guida Utente

Appendix

4.  Follow the instructions for using WebUpdater or click 

 (located under 

) and follow 

the instructions. (If 

 is not listed on the 

Web site, there are no updates.)

  NOTE: To avoid data corruption, do not turn the 

Astro 220 off or the DC 30 off during data transfer.

The DC 30 uses your Astro 220 as a wireless transfer 

device when transferring software updates and detailed 

dog tracks.

1.  Install Garmin MapSource Trip and Waypoint 

Manager. Follow the instructions for installation and 

operation provided with the software.

2.  Connect the Astro 220 to a computer using the USB 

cable provided. Turn the Astro 220 on.

3.  Turn the DC 30 on and place it within 12 inches of the 

Astro 220.

4.  Go to 

.

5.  Open the Dog Information page (

Astro 220.

6.  Press 

MENU > 

 and follow 

on-screen instructions.

7.  Follow the instructions for using WebUpdater or click 

 (located under 

Unit Software) and follow 

the instructions. (If 

Unit Software is not listed on the 

Web site, there are no updates.)

1.  Open Garmin MapSource Trip and Waypoint 

Manager. Select the Tracks tab on the left side of the 

MapSource page.

2.  Click 

Receive from Device from the Transfer menu.

The dog tracks saved on your Astro 220 are detailed 

enough for most users to view the movements of their 

dog. The DC 30 does, however, store more-detailed tracks