Garmin legend hcx Manuale Utente

a

ppendIx

Connect your eTrex to your computer using the PC/

USB connector cable provided. 

  NOTE: Fully install the supplied MapSource 

Trip & Waypoint Manager software on your 

computer before connecting the USB cable to the 

computer. Follow the instructions for installation 

and operation provided with the software.

1.  Lift the USB port protective cover from the back

of the eTrex, and insert the smaller connector 

on the USB cable into the matching port.

2.  Connect the remaining cable end to your

computer's USB port.

The USB drivers are automatically installed when 

you install the MapSource Trip and Waypoint 

Manager software that came with your eTrex. 

When you initially connect the eTrex to a USB 

port, your computer might prompt you to locate the 

destination of the drivers for the device. You only 

need to install the drivers once. After the drivers are 

installed, your computer always detects your eTrex 

when it is connected. USB drivers might be updated 

periodically. Find updates at: 

Tracks and waypoints saved on your eTrex can be 

saved and viewed in Garmin MapSource.

1.  Be certain Garmin MapSource Trip and

Waypoint Manager is installed on your

computer and open.

2.  Click “Receive from Device” from the Transfer

menu or click the “Receive from Device” icon at

the top of the screen.