Garmin eTrex Manuale Proprietario

28

1.   Use existing waypoints that reside in the eTrex. 

Choose ‘ROUTE’ on the ‘MENU’ Page, then add 
a waypoint into the route from a list of available 
waypoints. 

2.   Plan a ‘ROUTE’ in MapSource

®

 on a PC, and use  

“Save To Device” to download the ‘ROUTE’ to the 
eTrex.  See your Garmin dealer for more information 
on using MapSource  (MapSource is an optional 
accessory, and is not included with the eTrex).

In either case, you can navigate to a destination using 

‘ROUTE’ if a route has more than two waypoints. A single 
waypoint route is only a normal waypoint, not a route. 
The eTrex will not allow the ‘FOLLOW’ button to be 
highlighted if there is only one waypoint in the route. 
When you select the ‘FOLLOW’ button, a list with two 
items is displayed letting you choose where to go. The list 
will always show the FIRST (BEGINNING) and the LAST 
(END) waypoint in the route. The eTrex will guide you to 
the selected fi nal destination following each waypoint in 
the route (the eTrex has one route). 

1.  Press the PAGE Button and switch to the ‘MENU’ 

Page.  Press the UP or DOWN Button and highlight 
‘ROUTE’.  Press ENTER. The ‘ROUTE’ Page appears. 
Press ENTER.  The ‘ADD WAYPOINT TO ROUTE’ 
Page appears.

2.   Press the UP or DOWN Button to select the 

waypoint of your choice and press ENTER.  The 
waypoint you selected is placed in the fi rst fi eld on 
the ‘ROUTE’ Page.  Repeat this process until all of 
the waypoints you want are entered into the route 
list.  Press PAGE to get back to the page of your 
choice.

There are two ways to insert a waypoint into an exist-

ing route. One way is to insert the waypoint before an 
existing waypoint in a route. The other way is to insert 
the waypoint at the end of the waypoint list in a route.

etrex manual.indd   28

2/19/2003, 1:37:16 PM