Garmin legend cx Manuale Proprietario

G

ETTING

 S

TARTED

 > 

U

NIT

 O

VERVIEW

The eTrex operates on two AA batteries (not 

included), which are installed in the back of the unit. 

You can use Alkaline or NiMH batteries. See page 57 

for information on setting the battery type.

1.  Remove the battery 

cover by turning the D-Ring 

1/4 turn counter-clockwise 

and pulling the cover loose.
2.  Insert the batteries, 

observing the proper 

polarity. A polarity diagram 

is molded into the battery 

compartment. 
3.  Reinstall the battery 

cover by aligning the back 

cover with the unit and 

turning the D-Ring 1/4 turn 

clockwise.

Remove the batteries from your eTrex when you do 

not expect to use the unit for several months. Stored 

data is not lost when batteries are removed.

1.  Place the loop of the lanyard through the slot 

at the upper-left side on the back of the unit.

2  Route the strap through the loop, and pull tight.

PUSH 

TO EJECT