Garmin 530 Guida Utente
119
119
7 - nrst pages
Nearest User Waypoint Page
The Nearest User Waypoint Page displays the name, bearing and distance to the nine nearest user way-
points (within 200 nautical miles of your present position).
Nearest Center (ARTCC) Page
The Nearest Center Page displays the facility name, bearing to and distance to the fi ve nearest ARTCC
points of communication (within 200 nautical miles of your present position). For each ARTCC listed, the
Nearest Center Page also indicates the frequency(s) and may be used to quickly tune the COM transceiver to
the center’s frequency. The selected frequency is placed in the standby fi eld of the COM window and activated
using the COM fl ip-fl op key.
Nearest Center Page also indicates the frequency(s) and may be used to quickly tune the COM transceiver to
the center’s frequency. The selected frequency is placed in the standby fi eld of the COM window and activated
using the COM fl ip-fl op key.
To quickly tune an ARTCC’s frequency from the Nearest Center Page:
1. Select the Nearest Center Page, using the steps outlined on page 114.
2. Press the small right knob to activate the cursor.
3. Rotate the small right knob to scroll through the list, selecting the desired ARTCC.
4. Rotate the large right knob to scroll down the page, highlighting the desired frequency.
5. Press ENT to place the selected frequency in the standby fi eld of the COM window.
6. Press the COM fl ip-fl op key to activate the selected frequency.
7. Press the small right knob to remove the fl ashing cursor.
2. Press the small right knob to activate the cursor.
3. Rotate the small right knob to scroll through the list, selecting the desired ARTCC.
4. Rotate the large right knob to scroll down the page, highlighting the desired frequency.
5. Press ENT to place the selected frequency in the standby fi eld of the COM window.
6. Press the COM fl ip-fl op key to activate the selected frequency.
7. Press the small right knob to remove the fl ashing cursor.
STEP 3 & 4: Rotate the small right knob to se-
lect the desired center, then rotate the large right
knob to highlight the desired frequency.
lect the desired center, then rotate the large right
knob to highlight the desired frequency.
STEP 5 & 6: Press ENT to place the frequency on
standby. Press the COM fl ip-fl op key to activate
the selected frequency.
standby. Press the COM fl ip-fl op key to activate
the selected frequency.
Nearest ARTCC
ARTCC Name
Frequency(s)
Bearing To and
Distance To
Sixth Page in
NRST Group
NRST Group
113-188.indd 119
4/11/2003, 9:05:33 AM