Garmin 530 Guida Utente

1 - COM

To select a COM frequency for any airport in your ﬂ ight plan:

1. Select the NAVCOM Page from the NAV page group. (See page 27, or press and hold CLR, then rotate the

small right knob until the NAVCOM Page appears.)

2. Press the small right knob to place the cursor on the airport identiﬁ er ﬁ eld. To the left of this ﬁ eld appears

Departure, Enroute or Arrival — depending on the placement of the displayed airport within your ﬂ ight plan.

3. Rotate the small right knob to display a window listing the airports in your ﬂ ight plan. Continue rotating the

small right knob to select the desired airport.

4. Press ENT to return to the NAVCOM Page with the frequencies for the selected airport.

5. Rotate the large right knob to highlight the desired frequency.

6. Press ENT to place the highlighted frequency in the standby COM window ﬁ eld.

To select a COM frequency for any airport in the database:

1. Select the Airport Frequencies Page from the WPT page group. (See page 88, or rotate the large right knob

to select the WPT page group. Then rotate the small right knob until the Airport Frequencies Page appears.)

2. Press the small right knob to place the cursor on the airport identiﬁ er ﬁ eld.

3. Use the small and large right knobs to enter the identiﬁ er of the desired airport. Press ENT when ﬁ nished.

4. Rotate the large right knob to highlight the desired frequency.

5. Press ENT to place the highlighted frequency in the standby COM window ﬁ eld.

Auto-Tuning from Flight Plan

The NAVCOM Page provides a frequency list for
all the airports (departure, en route and arrival)
along your active ﬂ ight plan.

Use the Airport Frequencies Page to retrieve a
frequency list for ANY airport in the Jeppesen
NavData database.

i-60.indd 25

4/11/2003, 8:56:13 AM