Garmin 530 Guida Utente
28
2 - NAV PAGES
Default NAV Page
The fi rst NAV page is the Default NAV Page. This page may be quickly selected from ANY page by using
the CLR key.
To select the NAV group and display the Default NAV Page, press and hold CLR.
The Default NAV Page provides a “look ahead” map display with your present position at the bottom cen-
ter of the page. The top of the page displays desired track (DTK), ground track (TRK) and distance to des ti-
nation waypoint (DIS). The bottom of the page indicates ground speed (GS), active to/from waypoints (only
active to, for a direct-to destination) and estimated time en route. A graphic course de viation in dicator (CDI)
also appears at the bottom of the page. Unlike the angular limits used on a me chanical CDI cou pled to a VOR
or ILS receiver, full scale limits for this CDI are defi ned by a GPS-derived distance (0.3, 1.0 or 5.0 nm). By
default, the CDI scale automatically adjusts to the desired limits based upon the current phase of fl ight: en
route, terminal area or approach. You may also manually select the desired scale setting as outlined on page
148.
nation waypoint (DIS). The bottom of the page indicates ground speed (GS), active to/from waypoints (only
active to, for a direct-to destination) and estimated time en route. A graphic course de viation in dicator (CDI)
also appears at the bottom of the page. Unlike the angular limits used on a me chanical CDI cou pled to a VOR
or ILS receiver, full scale limits for this CDI are defi ned by a GPS-derived distance (0.3, 1.0 or 5.0 nm). By
default, the CDI scale automatically adjusts to the desired limits based upon the current phase of fl ight: en
route, terminal area or approach. You may also manually select the desired scale setting as outlined on page
148.
The graphic CDI shows your position at the center of the indicator, relative to the desired course (the
moving course deviation needle). As with a traditional mechanical CDI, when you’re off course simply steer
toward the needle. The TO/FROM arrow in the center of the scale indicates whether you are heading to the
waypoint (an up arrow) or if you have passed the waypoint (a down arrow).
toward the needle. The TO/FROM arrow in the center of the scale indicates whether you are heading to the
waypoint (an up arrow) or if you have passed the waypoint (a down arrow).
The following symbols are used — on the Default
NAV Page directly above the graphic CDI — to
depict the “active leg” of a fl ight plan or direct-to.
NAV Page directly above the graphic CDI — to
depict the “active leg” of a fl ight plan or direct-to.
Direct-To a Waypoint
Course to a Waypoint, or Desired
Course between Two Waypoints
Course between Two Waypoints
Left Procedure Turn
Right Procedure Turn
Vectors-To-Final
DME Arc to the left
DME Arc to the right
Left-Hand Holding Pattern
Right-Hand Holding Pattern
Default NAV Page
Active Leg of Flight Plan,
or Direct-to Destination
User-selectable Data Fields
(all four corners)
Course Deviation
Indicator (CDI)
First Page in NAV Group
i-60.indd 28
4/11/2003, 8:56:16 AM