Garmin 530w Guida Utente

6 - WPT PAGES

137

Modifying User Waypoints

Modifying User Waypoints

To modify an existing waypoint, select that

waypoint on the User Waypoint Page and enter the
new position information directly over the old infor-
mation.

From the User Waypoint Page, use the small

and large right knobs to modify the position

coordinates of an existing user waypoint.

To modify a user waypoint by changing its lati-
tude/longitude position:

1. With the User Waypoint Page displayed, press

the small right knob to activate the cursor.

2. Use the small and large right knobs to enter

the name of the desired waypoint and press
ENT.

3. Turn the large right knob to highlight the

position ﬁeld at the bottom of the page.

4. Use the small and large right knobs to enter

the new position coordinates and press ENT
to accept the selected position.

5. The cursor moves to the “Modify?” action ﬁeld.

Press ENT to modify the waypoint.

6. Press the small right knob to remove the

ﬂashing cursor.

To modify a user waypoint by changing reference

waypoint information:

1. With the User Waypoint Page displayed, press

the small right knob to activate the cursor.

2. Use the small and large right knobs to enter

the name of the desired waypoint and press
ENT.

3. Turn the large right knob to highlight the

ﬁrst reference waypoint (REF WPT) ﬁeld, if
you wish to change the reference waypoint.
Otherwise, continue turning the large right
knob to highlight the radial (RAD) or distance
(DIS) ﬁeld, as desired.

You can modify the location of an exist-
ing waypoint by changing the reference

waypoint and/or by changing the radial and

distance.

4. Use the small and large right knobs to

change the identiﬁer — if desired — of the
reference waypoint. The reference waypoint
can be an airport, VOR, NDB, intersection or
another user waypoint. Press ENT to accept
the selected identiﬁer.