Garmin 152 Guida Utente

31

5.    To enter an optional depth, highlight the “Depth” fi eld to the right of the position coordinates 

and press the ENTER/MARK key, then use the ARROW KEYPAD to enter a value and press 
ENTER/MARK. If you are receiving valid sonar NMEA input (page 83) , the depth fi eld will 
automatically fi ll in. Otherwise, you must manually enter a depth.

6.    When done, use the ARROW KEYPAD to highlight the ‘OK’ prompt and press ENTER/MARK to 

save the waypoint into memory.

Waypoints may also be quickly created with the Map Page cursor, which allows you to ‘point and 

shoot’ at any map position or map feature to create a new waypoint.  When you move the cursor over a 
map item, you will see a highlighted description of that item.  The GPS 152 will use the map item text 
shown on the cartography as the default name and symbol.  

1.  Use the ARROW KEYPAD to move the cursor to the desired map position. 

2.   Press and quickly release the ENTER/MARK key to capture the cursor location (pressing and 

holding the ENTER/MARK key will capture the current location, not the cursor’s location).

3.  The ‘New Map Waypoint’ page will appear. To accept the waypoint with the default name and 

symbol, highlight ‘OK’ and press ENTER/MARK. 

     To change the name, symbol or enter a depth, highlight the appropriate fi eld and press 

ENTER/MARK. Make your changes and press ENTER/MARK when done. After entering and 
confi rming your changes, highlight ‘OK’ and press ENTER/MARK.

152 Manual Part 2.indd   31

11/27/2002, 2:56:26 PM