Casio XJ-S31 Guida Utente

J Eco Mode” setting

T] key four times to select “Option Settings 1”.

T] key three times to select “Eco Mode”.

W] and [X] keys to select “On” or “Off”.

The password feature lets you keep unauthorized individuals from using the projector. You 
can specify whether password input is required whenever you turn on the projector, and you 
can specify and change the password as required. Use the setup menu “Option Settings 1 
J Power On Password” setting to configure power on password settings.

The password of your projector is not really a “word” made up of letters, but rather a 
sequence of remote controller key inputs. The following is the 8-key sequence that 
represents the initial factory default password.

Note the following precautions whenever you use the password feature.

• The password feature protects against unauthorized use of the projector. Note that it is 

not an anti-theft measure.

• You will need to enter the initial factory default password the first time you use the 

projector after turning on the password feature. Change the initial factory default 
password to a different one of your choice as soon as possible after turning on the 
password feature.

• Remember that password operations are always performed using the remote controller, 

so you should take care not to lose or misplace the remote controller.

• Also note that you will not be able to input the password if the remote controller battery 

is dead. Replace the remote control battery as soon as possible after it starts to go 
low.

[INPUT][AUTO][BLANK][FREEZE][

S][T][W][X]