Garmin gps 60 Guida Utente

Connecting the GPS 60 to Your Computer

The GPS connects to a personal computer with either a USB connec-

tor cable or a serial port cable . You must connect to a computer to load  

Garmin MapSource data. Refer to the MapSource User’s Guide provided 

with your MapSource CDs for instructions on installing and loading 

MapSource data to your GPS 60.

1.  Lift the USB protective cover from the back of the GPS 60 and insert 

the smaller connector on the USB cable (provided with the unit) into 
the matching port.

2.  Connect the remaining cable end to your PC USB port. If your 

computer has more than one USB port, use the port on the back of 
your computer for best results.

3.  Set your GPS 60 interface setting to GARMIN format (see p. 43).

1.  Lift the Serial Port protective cover from the back of the GPS 60 and 

insert the round indexed connector on the cable into the matching 
port.

2.  Connect the remaining cable end to your PC Serial Port or other 

appropriate device.

3.  Set your GPS 60 interface setting to the appropriate interface format 

(see p. 43).

Universal Serial 

Bus (USB) Port

Serial 

Communications 

Port

Lift Cover

Lift Cover