Garmin gps 60 Guida Utente

Interface formats are selected from the Interface Setup on page 43 

of this manual. The input/output lines on your GPS 60 are RS-232 

compatible, allowing easy interface to a wide range of external devices, 

including PC’s, differential beacon receivers, marine autopilots and /or a 

second GPS receiver.

The NMEA 0183 version 3.01 interface format is supported by the 

GPS 60 and enables the unit to drive up to three NMEA devices.
NMEA 0183 Version 3.01 Approved Sentences:

 GPGGA, GPGLL, GPGSA, GPGSV, GPRMB, GPRMC, GPRTE, 

GPVTG, GPWPL, GPBOD

 PGRME (estimated error), PGRMM (datum string), PGRMZ (alti-

tude), PSLIB (beacon receiver control)
DGPS (Differential GPS) corrections are accepted in RTCM SC-104 

version 2.0 format through the ‘Data In’ line. The Garmin GBR 21 is the 

recommended beacon receiver for use with the GPS 60. Other beacon 

receivers with the correct RTCM format may be used, but may not cor-

rectly display status or allow tuning control from the GPS unit. 

The USB Interface Cable provided with  

 

 

this unit allows you to connect your GPS   

 

60 to a 

PC-compatible computer’s USB port. 

Cable Plug End View