Garmin 196 Guida Utente

Selecting an Approach

CAUTION: The approaches provided in the Jeppesen database

are for monitoring purposes only. The GPSMAP 196 is not an

IFR-approved instrument and should not be used as a primary

source of navigation guidance in instrument conditions.

When you select an approach, it replaces the destination airport with

the sequence of waypoints for the selected approach. Keep in mind

that the airport must have a published approach (GPS, RNAV, VOR,

NDB, localizer, or ILS) and only the ﬁnal course segment (usually

from ﬁnal approach ﬁx to missed approach point) of the published

approach is available in the GPSMAP 196.

NOTE: When using a route, the selected approach for the

destination airport overrides your current route. The original

route is saved in the Route tab.

You can select an approach several ways:

• Press the Direct To and press MENU on the Goto Page,

as described in the steps to the right.

• From the Active Goto (or Active Route) Page, press MENU.
• From the Airport Details Page, select the Approach tab.

To select an approach for the destination airport:

1. Press the

Direct To to show the Goto Page. Select the

destination you want to travel to.

2. Press

MENU to open the options menu. Highlight Select

Approach, and press ENTER.

3. Use the

ROCKER to select the approach from the window,

and press

ENTER. A Vectors? window appears. See the

following page for more information on vectors.

Selecting an Approach

4. Use the

ROCKER to select Yes or No, and press ENTER.

The GPSMAP 196 removes the destination airport from the

Goto and replaces it with the approach waypoints.

GPSMAP 196 Pilot’s Guide

ASIC

PERATION

VIATION

ODE

ELECTING

PPROACH