Garmin 196 Guida Utente

1.  Highlight a track you want.
2.  Press 

MENU, and highlight TrackBack, and press ENTER.

Selecting a Saved Track

3.  Select 

Original or Reverse, and press ENTER.

When a TracBack has been started, the GPSMAP 196 divides 

the track into segments called legs. Up to 50 temporary turns are 

created to mark the most significant features of the track in order to 

duplicate your exact path as closely as possible. To get the most out 

of the TracBack feature, remember these tips:

•  Always clear the track log at the point that you want to go 

back to (such as a dock or campsite).

•  The Record Mode option on the Active sub tab must be set to 

Fill or Wrap.

•  If the track log Interval option on the Active sub tab is set to 

the Time option, the route may not navigate your exact path 

(keep the interval set to Resolution for best performance).

•  If the receiver is turned off or satellite coverage is lost during 

your trip, the TracBack draws a straight line between any 

point where coverage was lost and where it resumed.

•  If the changes in distance and direction of your track are too 

complex, the waypoints may not mark your path accurately. 

The receiver then uses the most significant points of your 

track so there are fewer changes in direction.

L

AND

 M

ODE

 P

AGES

 

AND

 F

EATURES

 > 

M

ANAGING

 Y

OUR

 T

RACKS