Garmin 182 Manuale Proprietario

7

The backlight will now cycle through minimum, the user-defined, and maximum backlight levels 

by repeatedly pressing the POWER key. You may also adjust the screen contrast (GPSMAP 182/232 
monochrome only).

1.  Press POWER and the Light and Contrast window will appear.
2.   To decrease or increase the screen contrast, press left or right on the ARROW KEYPAD.
3.   Press the ENTER/MARK key to finish.

Each page of the GPSMAP 182/182C/232’s system also features an options page, which gives you 

access to other functions and features that relate to the specific page you are viewing. To get a feel for 
how the options pages work, let’s put the GPSMAP 182/182C/232 into simulator mode.

1.   Press the MENU key twice for the Main Menu. Press Up or Down on the ARROW KEYPAD until 

the ‘GPS’ tab is highlighted, then press the MENU key once.

2.  Use the UP or DOWN arrow of the ARROW KEYPAD to highlight the ‘Start Simulator’ option and 

press ENTER/MARK. Choose ‘No’ to the retail demonstration and press the ENTER/MARK key. 

3.   Press the ENTER/MARK key to confirm the ‘Running Simulator’ message that appears at the 

bottom of the display. ‘Simulating’ will appear at the top of the Main pages.

While in Simulator mode, a ‘Running Simulator’ message will appear after 2 minutes of inactivity. Now 
you’re ready to continue the rest of the simulated tour. Keep in mind that the GPSMAP 182/182C/232 
does not track satellites in simulator mode, and this mode should never be used for actual navigation. 
All the waypoint and route planning done in simulator mode will still be retained in memory for future 
use.