Manualsbrain.com
  1. Manuali
  2. Marche
  3. Garmin
  4. 192c
  5. Manuale Proprietario

Garmin 192c Manuale Proprietario

Scarica
Pagina di 124
GPSMAP 192C Owner’s Manual 
3
B
ASIC
 O
PERATION
 > 
S
IMULATOR
 M
ODE
Simulator Mode
Simulator Mode turns the GPS receiver off for use indoors or 
practice. Any of the functions discussed in the following pages 
can be performed in Simulator Mode. While in Simulator Mode, a 
“Running Simulator” message appears after 2 minutes of inactivity. 
Keep in mind that the GPSMAP 192C does not track satellites in 
Simulator Mode, and this mode should never be used for actual 
navigation. All the waypoint and route planning completed in 
Simulator Mode is retained in memory for future use.
  NOTE: Do not attempt to navigate using Simulator Mode. 
When the unit is set to Simulator Mode, the GPS receiver is 
turned off. Any satellite signal strength bars displayed are only 
simulations and do not represent the strength of actual satellite 
signals.
To place the GPSMAP 192C in Simulator Mode:
1.   Press 
MENU twice to display the Main Menu. Press Up or 
Down on the 
ROCKER until the GPS tab is highlighted, 
then press 
MENU.
2.  Use the Up or Down arrow of the 
ROCKER to highlight 
Start Simulator and press ENTER. Choose No to the retail 
demonstration and press 
ENTER. 
3.   Press 
ENTER to confirm the Running Simulator message 
that appears at the bottom of the display. 
Simulating 
appears at the top of each of the Main pages.
4.  To turn off the Simulator Mode, press 
MENU, and select 
Stop Simulator.