Garmin 2006 Manuale Proprietario

B

ASIC

 O

PERATION

 > 

C

REATING

 

AND

 U

SING

 R

OUTES

  Press 

NAV, highlight Stop Navigation on the Navigation menu, and press 

ENTER.

The following options are available on the Navigation menu by pressing NAV 

while navigating a route:

•  Invert Route—reverses the route so you can follow it from the end point 

back to the beginning.

•  Re-Evaluate Route—recalculates and reactivates the current route data; 

and it selects the route leg closest to your current location as the active leg 

(the active leg defines the current from and to waypoints).

Use the Create QUICK soft key to create a quick route that you can begin 

navigating imediately.

1.  Press 

NAV/MOB, and highlight Follow Route.

2.  Press the 

Create QUICK soft key.

3.  Use the map pointer to select a waypoint or map item, and press 

ENTER. 

  As you add each new waypoint to the route, the data window at the top 

of the Map Page shows the waypoint or map item name, bearing and 

distance from your location, and coordinates of the map pointer. The 

bottom of the screen shows the number of available points. A route line 

appears on the map to indicate each completed leg, and a dotted line 

appears indicating the distance and bearing to the arrow pointer from the 

last route waypoint.

4.   Repeat step 3 until you finish adding all route waypoints.
5.  Press 

QUIT twice to start your quick nav route.

Use the Copy soft key on the Route tab to copy an existing route.

1.  Press and hold 

ADJ/MENU to open the Main Menu, and then highlight the 

Routes tab.

2.  Use the 

ROCKER to select the route you want to copy, and press the 

Copy soft key. The map window for the new route opens. The copied 

route uses the same route name with an additional number (starting at 1) 

at the end of the route name.