Garmin 2006 Manuale Proprietario

XM WX W

EATHER

 > 

C

USTOMIZING

 P

RESET

 W

EATHER

 D

ISPLAYS

This section covers the additional XM WX Weather options for the  

GPSMAP 3006C/3010C when used with the GDL 30/GDL 30A Marine  

Weather/Audio Satellite Receiver. Read the GDL 30/GDL 30A Owner’s Manual 

to properly install the GDL 30.

  NOTE: You must have a GDL30 Marine Weather Satellite Receiver installed 

and connected to your GPSMAP 3006C/3010C, and a subscription to XM WX 

Weather to use the XM WX Weather features.

When a GDL30 Marine Weather Satellite Receiver is connected to the  

GPSMAP 3006C/3010C, and either the Auto-Dectect Services or Weather check 

box is selected on the System tab, weather options are shown on the Map Page.

When you turn on weather and sea surface features, they appear on the Map Page. 

You can customize up to three weather presets. Default names are General, Sea 

State, and Storms, but each weather preset name can be changed. On the Map 

Page, press the Next Preset soft key to view each weather preset.
The setup page for each weather preset contains three tabs: Precipitation, 

Atmosphere, and Sea Surface.

•  Precipitation—set ranges for NEXRAD/cloud tops, storm cells, lightning, 

and hurricanes. Settings include Off, All Ranges, or from 30 ft to 800 nm.

•  Atmosphere—set ranges for wind, pressure, visibility, fronts, and city 

conditions. Settings include Off, All Ranges, or from 30 ft to 800 nm.

•  Sea Surface—set ranges for temperature, wave height, wave period, and 

wave direction. Settings include Off, All Ranges, or from 30 ft to 800 nm.

1.  Highlight the 

Weather tab, and then highlight the Setup sub tab.

2.  Highlight the on-screen button for the weather preset you want to 

customize, and press 

ENTER.