Garmin 392 Guida Utente

B

ASIC

 O

PERATION

 > 

S

IMULATOR

 M

ODE

Simulator Mode turns the GPS receiver off for use indoors or 

practice. You can perform any of the functions discussed in 

the following pages in Simulator Mode. Keep in mind that the 

GPSMAP 392/398/492/498 does not track satellites in Simulator 

Mode, and this mode should never be used for actual navigation. 

All the waypoint and route planning completed in Simulator Mode 

is retained in memory for future use.

  WARNING: Do not attempt to navigate using Simulator 

Mode. When the unit is set to Simulator Mode, the GPS 

receiver is turned off. Any satellite signal strength bars shown 

are only simulations and do not represent the strength of actual 

satellite signals.

1.   Press and hold 

ADJ/MENU to show the Main Menu. Use 

the 

ROCKER to highlight the GPS tab, and then press 

ADJ/MENU once.

2.  Use the 

ROCKER to highlight Start Simulator, and press 

ENTER. 

3.   Press 

QUIT to confirm the Running Simulator message 

that appears at the bottom of the screen. If the status bar 

is turned on, “Simulating” appears at the top of each of the 

main pages.

4.  To turn off Simulator Mode, press 

ADJ/MENU, and select 

Stop Simulator.