Garmin 496 Manuale Proprietario
Steep Turn—approaching a turn that requires a bank angle in excess of 25
degrees to stay on course.
Sunrise, Switching to Day Mode—the unit is switching to Day Mode.
Sunset, Switching to Night Mode—the unit is switching to Night Mode
Thunderstorm Warning—a severe thunderstorm warning was issued for the
Sunrise, Switching to Day Mode—the unit is switching to Day Mode.
Sunset, Switching to Night Mode—the unit is switching to Night Mode
Thunderstorm Warning—a severe thunderstorm warning was issued for the
area by the National Weather Service.
Tornado Warning—a tornado warning was issued for the area by the National
Tornado Warning—a tornado warning was issued for the area by the National
Weather Service.
Track Already Exists—a saved track with the same name already exists.
Track Log Full—the track log is full and track recording was turned off.
Track Already Exists—a saved track with the same name already exists.
Track Log Full—the track log is full and track recording was turned off.
To record more track points, you need to clear the track log and turn track
recording on.
Track Memory Full—no more track data can be stored. Delete the old track
Track Memory Full—no more track data can be stored. Delete the old track
data to store the new data.
Track Truncated—a complete uploaded track will not fit in memory. The
Track Truncated—a complete uploaded track will not fit in memory. The
oldest track log points have been deleted.
Transducer Disconnected, Sonar Turned Off—the unit has no transducer
Transducer Disconnected, Sonar Turned Off—the unit has no transducer
attached, has a bad cable/transducer, or has a disconnected transducer cable.
Transfer Complete—data transfer was completed.
USB Connected—the USB cable was recently plugged in.
User Timer Expired—the Timer Alarm value has counted down to zero.
VNAV Cancelled—VNAV function has been cancelled due to a change in the
USB Connected—the USB cable was recently plugged in.
User Timer Expired—the Timer Alarm value has counted down to zero.
VNAV Cancelled—VNAV function has been cancelled due to a change in the
active route.
Water Speed Sensor is Not Working—the speed sensor is not detected. Check
Water Speed Sensor is Not Working—the speed sensor is not detected. Check
the connections.
Water Temperature Alarm—sonar has reported a temperature above, below,
Water Temperature Alarm—sonar has reported a temperature above, below,
inside, or outside the specified values(s).
Waypoint Already Exists—a waypoint with the same name already exists.
Waypoint Memory Full—the unit has stored the maximum number of
Waypoint Already Exists—a waypoint with the same name already exists.
Waypoint Memory Full—the unit has stored the maximum number of
waypoints.
XM Antenna Not Responding—the unit is unable to communicate with the
XM Antenna Not Responding—the unit is unable to communicate with the
GXM 30A.
XM Connected—the GXM 30A antenna was recently plugged in.
XM Connected—the GXM 30A antenna was recently plugged in.
GPSMAP 496 Owner’s Manual
173
A
PPENDIX
>
M
ESSAGES