Garmin 378 Manuale Proprietario

Simulator Mode

To help you get to know your GPSMAP 378/478, you can use

the unit in Simulator Mode. Simulator Mode is also helpful for

practicing with the unit indoors or when no satellite signals are

available. All waypoints and routes created in Simulator Mode are

retained in memory for future use.
By unplugging the optional GXM 30 antenna and placing the unit in

Simulator Mode, you can view simulated weather information.

NOTE: Do not attempt to navigate using Simulator Mode. When

the unit is set to Simulator Mode, the GPS receiver is turned off.

Any satellite signal strength bars shown are only simulations and

do not represent the strength of actual satellite signals.

Starting Simulator Mode

You can start Simulator Mode from the Setup tab or the GPS tab on

the Main Menu.

To put the unit into Simulator Mode using the GPS tab:

1. Press

MENU twice to open the Main Menu.

2. Highlight the

GPS tab.

3. Press

MENU to open the GPS tab options menu.

4. Highlight

Start Simulator, and press ENTER.

GPS tab

Starting Simulator Mode from the GPS tab

Entering a New Location

Use the GPS options menu to enter a new location to simulate from.

To enter a New Location using the map:

1. Press

MENU twice, and then highlight the GPS tab.

2. Press

MENU to open the options menu.

3. Highlight

New Location, and press ENTER.

4. Highlight

Use Map, and press ENTER.

5. Use the

ROCKER to move the panning arrow to the location

you want on the map, and press

ENTER.

GPSMAP 378/478 Owner’s Manual

ETTING

TARTED

IMULATOR

ODE