Garmin 2006 Manuale Proprietario

B

ASIC

 O

PERATION

 > 

C

REATING

 

AND

 U

SING

 W

AYPOINTS

1.  Use the 

ROCKER to move the map pointer and highlight the map feature 

you want. 

2.  Press 

ENTER/MARK to capture the pointer location. The Review Page for 

the selected map feature appears. 

3.  Press the 

Create Wpt soft key to open the Review Waypoint Page. 

4.  To accept the waypoint with the default information, press 

ENTER.  

To change any waypoint information, highlight the appropriate field and 

press 

ENTER. After entering your changes, press the OK soft key.

You can manually enter position coordinates to create a waypoint using the Points 

tab on the Main Menu. This method is useful for creating a waypoint at a specific 

latitude/longitude position from a chart or other source. 

  CAUTION: When entering a waypoint manually, be sure that the unit is set 

to the same position format and map datum as the paper chart or coordinates 

source. Entering coordinates into the GPSMAP 2206/2210 while it is set to 

a datum different from the datum in which the coordinates were created can 

result in an incorrect waypoint location. 

Enter location 

coordinates 

manually.

1.  Press and hold 

ADJ/MENU to open the Main Menu. 

2.  Highlight the 

Points tab. You can also mark your present location using 

, and then proceed to step 4.