Garmin 292 Guida Utente

B

ASIC

 O

PERATION

 > 

C

REATING

 

AND

 U

SING

 W

AYPOINTS

5.   To enter optional comments or a depth, highlight the 

Comments, Depth, or Water Temp, and press ENTER/

MARK, use the ROCKER to enter a value, and press 

ENTER/MARK.

6.   To manually enter a set of coordinates, highlight the 

coordinates, and press 

ENTER/MARK, use the ROCKER to 

enter the new coordinates, and press 

ENTER/MARK when 

finished.

7.   Use the 

ROCKER to highlight OK. When finished, press 

ENTER/MARK to save the waypoint into memory.

You create waypoints graphically from the Map Page. To mark 

a map location or map item, select the location or item with the 

map pointer, and press ENTER. When selecting a location or map 

item, a description of the point, its distance and bearing from your 

current location, and the latitude/longitude of the map pointer is 

shown along the top of the map.

1.   Use the 

ROCKER to move the map pointer to a map 

location. If you want to create the new waypoint at an 

on-screen map item, highlight the map item on the screen.

2.  Press and release 

ENTER/MARK to capture the map 

pointer location. Do not hold the button down, doing so 

marks your present location, not the map location.

  If you are not using a map item to create a waypoint, go to 

step 4.

3.   Highlight 

Create Wpt, and press ENTER/MARK.

4.   To accept the waypoint with the default name and symbol, 

press 

ENTER/MARK. 

5.   To change the name, symbol, or add a comment or depth, 

highlight the appropriate field, and press 

ENTER/MARK. 

Make your changes, and press 

ENTER/MARK when 

finished.

6.   Highlight 

OK, and press ENTER/MARK to confirm the 

changes.