Garmin 292 Guida Utente

M

AIN

 P

AGES

 > 

C

OMPASS

 P

AGE

Setup—configures the Map Page preferences, including map 

detail, map orientation, automatic zoom, and various map items 

and points. Refer to “Main Menu—Map Tab” on 

page 61

information.

1.   From the Map Page menu, highlight 

Setup, and press 

ENTER.

2.  Press left or right on the 

ROCKER to highlight a tab, then 

press up or down on the 

ROCKER to highlight the setting 

you want to change, and press 

ENTER.

3.  Press up or down on the 

ROCKER to highlight to a setting, 

and press 

ENTER. To exit, press QUIT.

From the map setup page, you can access the following menu 

options by pressing ADJ/MENU: 

•  All Map Defaults—restores settings back to factory settings 

for all tabs.

The Compass Page provides graphic steering guidance to a 

destination waypoint, with an emphasis on the bearing to your 

destination and current direction of travel. The middle of the 

page features a rotating compass ring that shows your course 

over ground (track) while you are moving, and a bearing pointer 

that indicates the direction of the destination (bearing) relative 

to the course over ground. The compass ring and map pointer 

work independently to show—at a glance—the direction of your 

movement and the direction to your destination. For instance, if 

the arrow points up, you are going directly to the waypoint. If the 

arrow points any direction other than up, turn toward the arrow 

until it points up—then continue in that direction. 
This page provides better steering guidance when traveling at 

slower speeds and/or when making frequent directional changes. 

When you are not navigating to a waypoint, the compass ring 

shows the current direction of travel but the arrow does not appear.

  NOTE: The bearing pointer, bearing bug, and compass ring 

can point in various directions when you are stationary or at 

very low speeds. When you start moving, the map pointer is 

correct.