Garmin 292 Guida Utente

U

SING

 S

ONAR

 > 

S

ONAR

 P

AGE

The Adjustment Menu gives you direct access to the settings and 

features most commonly used on the Sonar Page. The option 

selected currently appears in the upper-left of the screen.

Press 

ADJ/MENU to see a list of all 

options and their current settings.

1.  Press the 

ROCKER left or right to scroll through the options 

in the upper left of the screen.

2.  Press 

ENTER to access the option’s adjustment window.

OR
1.  Press 

ADJ/MENU. A list of all options and their current 

settings appears, with the selected option highlighted. 

2.  Press up or down on the 

ROCKER to select the option, and 

press 

ENTER to access the adjustment window

3.  To exit any of the adjustment options, press 

QUIT.

1.   Select an adjustment option to change using one of the 

two methods described previously. The adjustment window 

automatically times out and disappears when the unit is idle 

for 20 seconds. 

2.   Press the 

ROCKER up or down to place the map pointer  

or setting bar at the setting, range, or percentage  

(Off, 1-100%). 

3.  Press 

ENTER or QUIT to exit the adjustment window, 

or press left or right on the 

ROCKER to view another 

adjustment window. 

Range—sets the screen depth range used for viewing. The unit can 

be set to automatically track the bottom or set to a user-specified 

depth range. Auto mode shows the most information possible while 

continuously showing the bottom.
Gain—allows you to control the sensitivity of the unit’s receiver. 

This provides some flexibility in what is seen on the screen. To 

see more detail, increase the receiver sensitivity by selecting a 

higher gain percentage. If there is too much detail or if the screen 

is cluttered, lowering the sensitivity can increase the clarity of the 

screen.