Garmin 292 Guida Utente
GPSMAP 292/298 Owner’s Manual
103
A
PPENDIX
>
M
ESSAGES
Sonar Service Incompatible—(only applied to the GPSMAP 292)
the external sonar device you are connected to needs a software
update.
Sonar Service Lost—(only applied to the GPSMAP 292) the
Sonar Service Lost—(only applied to the GPSMAP 292) the
external sonar device you were connected to has either been
disconnected or the GPSMAP 292 has lost communication with the
sonar device for some other reason.
Track Already Exists [Track Name]—you entered a saved track
Track Already Exists [Track Name]—you entered a saved track
name that already exists in memory. Modify the track name or
delete the existing track.
Track Memory Full—no more track data can be stored without
Track Memory Full—no more track data can be stored without
deleting old data.
Track Log Full—the track log is full and track recording has been
Track Log Full—the track log is full and track recording has been
turned off. To record more track points, you need to clear the track
log and turn track recording on. This only appears when the track
recording setting is set to “Stop When Full.”
Track Memory is Full, Can’t Create Track—the track log
Track Memory is Full, Can’t Create Track—the track log
memory is full. No additional track log data can be stored without
deleting old data to create memory space.
Track Truncated—a complete uploaded track does not fit into
Track Truncated—a complete uploaded track does not fit into
memory. The oldest track log points were deleted to make space for
the most recent data.
Transducer Disconnected, Sonar Turned Off—there is not a
transducer attached, bad cable/transducer, or the transducer cable
was disconnected. If the transducer cable is removed while the unit
is on, reconnect and cycle power.
Transfer Complete—the unit has finished uploading or
Transfer Complete—the unit has finished uploading or
downloading information to the connected device.
User Card Not Found, Please Insert Card—attempted to transfer
User Card Not Found, Please Insert Card—attempted to transfer
user data without a data card containing user data being present in
the Data Card slot.
Water Temperature Alarm—sonar has reported a temperature
Water Temperature Alarm—sonar has reported a temperature
above, below, inside, or outside the specified value(s).
Waypoint Already Exists—you entered a waypoint name that
Waypoint Already Exists—you entered a waypoint name that
already exists in memory. Modify the waypoint name or delete the
existing waypoint.
Waypoint Memory Full—you have used all 4,000 waypoints
Waypoint Memory Full—you have used all 4,000 waypoints
available. Delete unwanted waypoints to make space for new
entries.