Garmin 3005c Manuale Proprietario

Pagina di 112
34 
GPSMAP 3005C Owner’s Manual
M
AIN
 P
AGES
 > 
M
AP
 P
AGE
Use the RANGE Up and RANGE Down keys and the ROCKER to select zoom 
ranges and move the map pointer. Two basic map operating modes, Position mode 
and Pointer mode, determine what cartography (map data) is shown on the Map 
Page. Position mode pans the cartography to keep the current position marker 
within the display area, whereas Pointer mode pans the cartography to keep the 
map pointer within the display area.
The GPSMAP 3005C starts in Position mode, with your location centered on the 
map. 
Press up, down, left, or right on the ROCKER to enter Pointer mode. In Pointer 
mode:
•  You can move the map pointer over the map display using the 
ROCKER.
•   When the map pointer reaches the edge of the display, the map scrolls 
forward under the pointer. Keep in mind that the boat icon moves with the 
map scrolling and may go off the screen (you might not be able to see your 
current location).
•   When the map pointer is stationary, a fixed coordinate location appears in 
the position field. The distance and bearing change as the boat’s location 
changes.
•   When you change the range in Pointer mode, the map pointer is centered 
on the screen.
•   To return to Position mode, press QUIT
  NOTE: When the map pointer reaches the edge of the map, the unit may pause 
as it loads new map data.
Geographic name
Map 
item
Land 
Map range
Navaid
Boat icon
Water
Using the Map Pointer
Controlled by the ROCKER, the map pointer is an important tool that can be 
used to pan to other map locations, mark and edit waypoints and routes, and 
review location data of on-screen map items and waypoints.