Garmin 376c Manuale Proprietario
Depth Line—adds a horizontal depth line across the display that is
used to measure the depth of underwater objects. The depth of the
line appears in a box on the right side of the line. Press Up or Down
on the ROCKER to move the line on the sonar display.
Noise Reject—helps filter unwanted noise from the sonar display.
Noise Reject—helps filter unwanted noise from the sonar display.
The Noise Reject can be turned Off, set to Normal (automatically
adjusts for optimum viewing) or to a fixed 1–100% setting. When
setting the Noise Reject, remember that a higher noise rejection
setting is less likely to show fish or structures.
Resizing the Split Screen
You can adjust the way the split screen appears. This option is only
available when a zoom scale other than No Zoom is selected.
To resize the Sonar Page split screen:
1. From the Sonar Page split screen, press
MENU.
2. Using the
ROCKER, highlight Size Split, and press ENTER.
3. Move the horizontal double-arrow left or right using the
ROCKER until the vertical width line shows, then press
ENTER.
4. If you want to cancel this operation, press
QUIT or press
MENU, highlight Stop Resizing, and press ENTER.
Using the Pointer on the Sonar Page
You can display the pointer (arrow) to reference sonar items and
mark underwater waypoints. This makes it easier to find and use
an object such as a stump for a future fishing location. When using
this feature, the Sonar Page pauses. The depth continues to update
while the display is paused, but the unit does not show any new
sonar data until the Sonar Page resumes scrolling. You might see a
discontinuity from where the sonar information stops and where it
starts again.
To mark an underwater waypoint:
1. From the Sonar Page, press
MENU, highlight Show Pointer,
and press
ENTER.
2. Use the
ROCKER to move the pointer to the location you
want to mark. Press
ENTER. The New Map Waypoint page
appears.
3. To change the name, symbol or depth, highlight the
appropriate field and press
ENTER. Make your changes and
press
ENTER.
4. When you are done making changes, highlight
OK and press
ENTER.
5. To return to the standard Sonar Page, press
QUIT; or press
MENU, highlight Hide Pointer, and press ENTER.
GPSMAP 376C Owner’s Manual
107
S
ETTING
UP
AND
U
SING
S
ONAR
>
U
SING
THE
S
ONAR
P
AGE