Garmin 376c Manuale Proprietario
You must change the Compass Page layout to use the Marine Timer.
To open the Marine Timer:
1. Press
PAGE repeatedly until the Compass Page appears.
2. Press
MENU.
3. Use the
ROCKER to highlight Set Up Page Layout and
press
ENTER.
4. Highlight
2 Columns With Timer, and press ENTER. The
Marine Timer appears in the lower right corner.
To use the Marine Timer:
1. Press the
ROCKER up or down to select the time you want
to count. Five (5) minutes is the default.
2. Press
ENTER to start the timer. Use the ROCKER during the
timing to quickly select a different length of time.
3. Press
ENTER to stop timing.
Marine Timer on the Compass Page
As discussed previously, the timer is set to count down five minutes.
If you want to change the length of time and the behavior or the
timer, open the Timers Setup tab on the Main Menu.
NOTE: You can set the timer countdown for up to 60 minutes.
To set the Marine Timer:
1. Press
MENU twice to open the Main Menu.
2. Press the
ROCKER down to select the Setup tab, and then
left to select the
Timers sub tab.
3. Highlight
Stop next to Marine to change the timer’s behavior.
4. Highlight the time field, press
ENTER, and then use the
ROCKER to enter a new time.
GPSMAP 376C Owner’s Manual
49
M
ARINE
M
ODE
P
AGES
AND
F
EATURES
>
C
OMPASS
P
AGE