Garmin 276c Manuale Proprietario

1.  Press 

MENU twice to open the Main Menu. 

2.  Use the 

ROCKER to highlight the Setup tab, and then 

highlight the 

Location sub tab. 

3.  Using the 

ROCKER, highlight the Location Format field and 

press 

ENTER.

4.  Highlight 

Loran TD, and press ENTER. 

5.  Highlight the 

Setup button located on the right side of the 

Location Format field, and press ENTER. The Loran TD 

Setup window appears.

6.  To change the settings of any of the five fields, highlight the 

field, press 

ENTER, select a setting using the ROCKER, and 

press 

ENTER again.

7.  When finished, highlight the 

Save button, and press ENTER.

If the active GRI Chain, secondary stations, or offsets were changed 

since the waypoint was created, the waypoint will now reference 

the active GRI chain and secondary stations and adjust the TD 

coordinates accordingly. Remember that the GPS is not relying 

on the LORAN signal for navigation and actually converts the 

TD coordinate to a useful latitude and longitude coordinate before 

storing the waypoint to memory or using it for navigation. Because 

of this, the unit can navigate to a TD coordinate anywhere in the 

world.
You must know your GRI chain number and secondary stations 

to create a LORAN TD position. For more information, read our 

LORAN TD Position Format Handbook, available at the Garmin 

Web site, at

A

PPENDIX

 > 

LORAN TD S

ETUP