Garmin 5008 Manuale Proprietario

u

SInG

 r

adar

To access additional settings or options for the radar overlay screen, touch 

. There are two sets 

of options you can access, radar or chart. The radar setup options are the same as the radar cruising 

). Touch 

 > 

 to access the chart options. The chart options 

). Touch 

 to access the radar setup options.

To change radar settings from the Home screen, touch 

 > 

, or touch 

 while 

viewing the radar cruising screen or radar overlay screen and then touch 

.

Orientation—changes the perspective of the radar display:

Heading up—sets the radar display to the current track heading.
North up—sets the top of the radar display to a north heading.
Course up—sets the radar display so the direction of navigation is always up. The heading 

line appears vertically on the screen if it is shown.

Heading line—shows or hides a line in the direction of travel.
Rings—shows or hides the radar range rings.
look-Ahd spd—adjusts your location toward the bottom of the screen as your speed increases. The 

speed entered is the speed at which the maximum position shift occurs, so enter your expected top 

speed for best results.
Timed Xmit—sets and customizes a transmit/standby cycle. Define the transmission time 

(

) and standby time (

) in minutes.

Xtalk Reject (Crosstalk)—filters out interference caused by another radar operating in close 

proximity.
Advanced—opens a menu of advanced settings:

FTC (fast time constant)— controls unwanted screen clutter caused by rain at a distance. Set 

to High, Medium, Low, or Off.
Front of Boat—sets the offset of the front of the boat if you mount the radar at an angle.
Antenna size (GMR 404/406 only)—selects the size of your antenna. Touch 

 if you 

have a GMR 404; touch 

 if you have a GMR 406.

Motor speed (GMR 404/406 only)—sets the motor speed of your GMR 404/406. Touch High 

Speed to increase the speed at which the radar rotates, which also increases the speed at which 

the screen updates.

•

•
•

•