Garmin 5008 Manuale Proprietario

Pagina di 82
 
GPSMAP 5000 Series Owner’s Manual
a
ppendIX
a
ppend
IX
Weather service lost—(XM WX weather) the weather service is no longer communicating. Make 
sure you have a strong XM signal. Check the network and the XM wiring.
XM service Incompatible. software update Required—an XM service software update is 
needed. Contact product support for assistance updating your network.
Product Registration
Help us better support you by completing our online registration today! Connect to our Web site at 
.
Use this area to record the serial number (9-digit number located on the back of the product) in case 
your product needs service. Keep the original sales receipt, or a photocopy, in a safe place.
Serial Number: ___  ___  ___  ___  ___  ___  ___  ___  ___
Contact Garmin
Contact Garmin if you have any questions while using your unit. In the USA contact Garmin 
Product Support by phone: (913) 397-8200 or (800) 800-1020, Monday–Friday, 8 AM–5 PM Central 
.
In Europe, contact Garmin (Europe) Ltd. at +44 (0) 870.8501241 (outside the UK) or 0808 2380000 
(within the UK).
Caring for the Unit
The case is constructed of high-quality materials and does not require user maintenance, except 
cleaning.
Cleaning the Case
Clean the unit’s outer casing (except for the screen) using a cloth dampened with a mild detergent 
solution and then wipe dry. Avoid chemical cleaners and solvents that may damage plastic 
components.
Cleaning the Screen
The unit’s lens is coated with a special anti-reflective coating that is sensitive to skin oils, waxes and 
abrasive cleaners. Cleaners containing ammonia, alcohol, abrasives, or anti-grease detergents will 
harm the anti-reflective coating. It is important to clean the lens using an eyeglass lens cleaner (that 
is specified as safe for anti-reflective coatings) and a clean, lint-free cloth.
Water Immersion
The unit is waterproof to IEC Standard 60529 IPX7. It can withstand immersion in 1 meter of water 
for 30 minutes. Prolonged submersion can cause damage to the unit. After submersion, be certain to 
wipe and air dry the unit before reuse.