Garmin 536 Guida Utente

Where To?

BlueChart g2 Vision data cards are susceptible to damage from 

static electricity. In low-humidity environments, you should ground 

yourself on a large metal object before handling the card to prevent 

damage to the card.
Optional BlueChart g2 Vision preprogrammed SD cards allow 

you to get the most out of your unit. In addition to detailed marine 

charting, BlueChart g2 Vision has the following features:

Mariner’s Eye 3d—provides a view from above and behind 

). The 

BlueChart g2 Vision Mariner’s Eye 3D is more detailed than the 

preloaded data.
fish Eye 3d—provides an underwater 3D view that visually 

represents the sea floor according to the information on the chart.
High Resolution Satellite imagery—provides high-resolution 

satellite images for a realistic view of the land and water on the 

Navigation chart.
aerial Photos—provides a view of marinas and other 

navigationally significant aerial photos to help you visualize your 

surroundings. 
detailed Roads and POi data—provides a view of roads, 

restaurants, and other points of interest (POIs) along the shore.
Current data—provides a view of current-station information 

).

auto guidance—uses the chart data and specified boat safe 

depth to determine the best course to your destination (

NOTE: You cannot transfer BlueChart g2 Vision data from the SD 

card to your computer for backup. You can transfer BlueChart g2 

Vision data from the SD card to your computer for viewing purposes 

if HomePort is installed on your PC. You can only use the SD card 

on BlueChart g2 Vision-compatible Garmin GPS units and when 

using HomePort.

When you start any type of navigation (go To, Route To, guide 

To, or follow Track), if you are connected to a compatible Garmin 

autopilot, you are prompted to engage the autopilot. 
NOTE: Autopilot can be used only with NMEA 2000 compatible 

chartplotters (GPSMAP 441/441s, GPSMAP 536/536s, GPSMAP 

541/541s, and GPSMAP 546/546s).