Garmin 536 Guida Utente
40
GPSMAP 400/500 Series Owner’s Manual
Viewing Information
Configuring Engine Gauges
The amount of fuel on board can be represented by either the total
fuel level (numeric) or by individual tank level (graphic).
From the Home screen, select
Information
>
Dashboard
>
Engine
>
MEnU
>
Gauge Setup
>
Fuel Display
.
Use Total Fuel Level—select to display a numeric value for
the total fuel level.
Use Fuel Tank Levels > num. Tanks—select to display a
Use Fuel Tank Levels > num. Tanks—select to display a
graphical representation of all the specified tanks.
Viewing and Synchronizing Fuel Gauges
Viewing Fuel Gauges
To view engine information, your chartplotter must be connected to
a device capable of measuring fuel level, fuel flow, or both.
From the Home screen, select
Information
>
Dashboard
>
Engine
.
•
•
Synchronizing Fuel Gauge readings with Fuel Levels
From the Home screen, select
Information
>
Dashboard
>
Fuel
(or
Engine)
>
MEnU
.
Fill Up All Tanks—select when your tanks are full. The fuel
level is reset to maximum capacity. Adjust if necessary.
Add Fuel To Boat—select when you have added less than
Add Fuel To Boat—select when you have added less than
a full tank. Enter the amount of fuel added. Select
Done
. An
estimate of the fuel added appears. Adjust if necessary.
Set Total Fuel Onboard—select to specify the total fuel in
Set Total Fuel Onboard—select to specify the total fuel in
your tanks. Select
Done
.
•
•
•