Garmin 536 Guida Utente

Configuring the Chartplotter

water Temp—set an alarm to sound when the transducer reports 

a temperature that is 2°F (1.1°C) above or below the specified 

temperature.
fish—set an alarm to sound when the unit detects a suspended 

target of the specified symbols.

—sounds an alarm for all fish sizes.
—sounds an alarm for medium and large fish only.
—sounds an alarm for large fish only.

NOTE: You must have a subscription to XM WX Weather and 

a connected Garmin XM WX weather receiver to view weather 

information (

1.  From the Home screen, select 

 > 

 > 

.

2.  Turn the following alarms on or off: marine, tornado, severe 

storm, flood, or flash flood.

You can configure your chartplotter to sound an alarm when the total 

amount of remaining onboard fuel reaches the specified level.
NOTE: To receive fuel-level information, your unit must be 

connected to an external fuel sensor, such as the Garmin GFS 10.

1.  From the Home screen, select 

 > 

 > 

 > 

 > 

 (or 

).

2.  If you select 

On, use the 

 to indicate the fuel level at 

which the alarm should sound.

  To configure settings for your boat, from the Home screen, select 

 >

.

Keel Offset—compensates for the surface reading for the depth of 

a keel, making it possible to measure depth from the bottom of the 

keel instead of from the transducer location. Enter a positive number 

to offset for a keel. You can enter a negative number to compensate 

for a large vessel that may draw several feet of water.

1.  If the transducer is installed at the water line, measure the 

distance from the transducer location to the keel of the boat. 

Enter this value in step 3 as a positive number.

  If the transducer is installed at the bottom of the keel, measure 

the distance from the transducer to the water line. Enter this 

value in step 3 as a negative number.

2.  From the Home screen, select 

 > 

 > 

.