Garmin 536 Guida Utente

Using Digital Selective Calling

The selection of a DSC channel is limited to those channels that are 

available in all frequency bands: 6, 8, 9, 10, 13, 15, 16, 17, 67, 68, 

69, 71, 72, 73, or 77.
NOTE: The default channel is 72. However, select 

 to 

select a different channel from the list. If you select a different 

channel, the chartplotter uses that channel for subsequent calls until 

you call using a different channel.

1.  While viewing a chart, press 

 > 

 > 

 > 

.

2.  Select the station to call from the list.
3.  Select 

 > 

.

4.  Select 

 to send the information about the call to the radio.

5.  On your Garmin VHF radio, select 

.

When you connect your Garmin chartplotter to a Garmin VHF 

NMEA 2000 compatible radio, you can use the chartplotter interface 

to set up an individual routine call to an AIS target. For more 

information on selecting a channel other than the default channel 

1.  While viewing a chart, use the 

 to select an AIS 

target  .

2.  Select 

 > 

.

3.  Select 

 to send the information about the call to the radio.

4.  On your Garmin VHF radio, select 

.