Garmin 536 Guida Utente

Pagina di 96
 
GPSMAP 400/500 Series Owner’s Manual
Appendix
acquisition Times: (Average acquisition times for a stationary 
receiver with a clear view of the sky) 
GPSMAP 431/431s  GPSMAP 441/441s 
GPSMAP 531/531s  GPSMAP 541/541s
 
Warm:* Approximately 1 second 
Cold:** Approximately 38 seconds
 
GPSMAP 536/536s  GPSMAP 546/546s
 
Warm:* Approximately 15 seconds 
Cold:** Approximately 38 seconds
 
*warm: your unit is at or near the last location where you 
recently acquired satellites. 
**Cold: your unit has moved by more than about 500 mi. (800 
km) since it was turned off, or it has been turned off for more 
than 2 weeks.
gPS accuracy:  
Position: <49 ft. (15 m), 95% typical 
Velocity: 0.164 ft./sec 0.05 m/sec steady state
waaS accuracy: 
Position: <10 ft. (3 m), 95% typical 
Velocity: 0.05 m/sec steady state 
dynamics: 6 g
Power
Power Source: 10–32 Vdc
Usage: 15 W max at 13.8 Vdc
fuse: AGC/3AG - 3.0 A
Sonar
Power: 1 kW Transducer (1 kW transducers are supported by the 
GPSMAP 536s and 546s units only), 1,000 W (RMS), 
8,000 W (peak to peak); 
Dual Frequency, 500 W (RMS), 4,000 W (peak to peak);  
Dual Beam, 400 W (RMS), 3,200 W (peak to peak)
frequency: 50/200 kHz (dual frequency and 1 kW), 80/200 kHz 
(dual beam)
depth: 2,500 ft. (762 m) (1 kW), 1,500 ft. (457 m) (dual frequency), 
900 ft (274 m) (dual beam). Depth capacity is dependent on 
water salinity, bottom type, and other water conditions.