Garmin 60csx Guida All'Installazione Rapida

Start-Up and Satellite Acquisition

Find a location where you have a clear view of the sky. If you’re 

starting up for the first time or you have moved over 600 miles 

since last using the GPSMAP 60CSx, it must initialize (determine 

its location by searching for satellites that are in position over your 

current location.) Press the MENU key to use the Location option 

from the Satellite Page Options Menu to mark your approximate 

location on the Map Page so it looks for only those satellites above 

your location.

1. Turn On the GPSMAP 60CSx by pressing and releasing the  

  POWER key. A Welcome Page will briefly appear before  

  moving to the Satellite Page. 
2. Observe the Satellite Page and the GPS status messages  

  as they appear at the top of the page.
  •  “Acquiring Satellites” message appears as the GPSmap  

      60CSx begins to search for satellites overhead.
  •  Your “Location Coordinates” display when four or    

      more satellites are fixed (enough to determine an ap- 

     proximate elevation as well as ground location).

                   Key Function

The GPSMAP 60CSx operates on two “AA” batteries (not includ-

ed), which are located in the back of the unit. Alkaline or NiMH  
batteries  may be used (see the Owner’s Manual for setting the bat-
tery type). Stored data is not lost when the batteries are removed.

Battery Compartment

USE BY

: 2009

USE BY

: 2009

Locking 
Pin Slot

1. To remove the battery cover 

from the back of the unit, 
turn the D-Ring 1/4 turn 
counter-clockwise and then 
pull the cover away.

2. Insert the batteries, observ-

ing the proper polarity.               
A polarity diagram can be 
found molded into the battery 
compartment. 

3. Reinstall the battery cover by 

inserting the bottom slot over 
the tab at the base of the 
unit and reinserting the  
locking pin in the back of the 
unit. 

4. Turn the D-Ring 1/4 turn 

clockwise to lock the cover in 
place.

Battery Cover

Adjustment 

Slider

POWER/BACKLIGHT Key - Press and hold to turn 

unit On/Off. Press and release to adjust backlighting.

IN/OUT Zoom Keys - From the Map Page, press to 

zoom in or out. From any other page, press to 
scroll up or down a list.

FIND/MOB Key - Press and release at any time to 

view the Find Menu Page. Press and hold for 
MOB (Man Overboard) feature.

MARK Key - Press and release at any time to mark 

your current location as a waypoint.

QUIT Key - Press and release to cancel data entry or 

exit a page.

 
PAGE/COMPASS Key - Press to cycle through the 

main pages. Press when using the on-screen key-
board to close. Press and hold to turn electronic 
compass On/Off.

MENU Key - Press and release to view options  

for a page. Press twice to view the Main Menu.

ENTER Key - Press and release to enter highlighted 

options, data or confirm on-screen messages.

ROCKER Key - Move Up/Down or Right/Left to 

move through lists, highlight fields, on-screen 
buttons, icons, enter data or move the map pan-
ning arrow.

If the GPSMAP 60CSx can’t get past the “Acquiring Satellites” 

message or you get a “Lost Satellite Signal” message, move to a new 

location away from objects that may be blocking signals.

Satellite Page

Displays your location coordinates, position accuracy, a view of the satellites 

overhead, and bar graph showing the signal strength of each overhead satellite. 

Satellite Page 

Options 

•  Turn GPS Off

•  Orient display  

  to your direction    

    of movement “Track  

  Up” or... “North  

  Up” (as shown)  
•  Change display colors 
•  Use Map Page to  
  mark your location
•  GPS Elevation  

Status  Bar

3D GPS 

indicator

Received 

Satellite icon

Heading Bug indi-

cates your direction 

of movement

Overhead 

Satellite not 
yet received

Adjusting the Backlighting

When lighting conditions may make it difficult to view the 

GPSMAP 60CSx display, turn on the backlighting and adjust it to 
the desired level of brightness.

Viewing the Main Pages

The Main Pages provide the information you need for basic 

navigation using the GPSMAP 60CSx. Press the PAGE key repeat-
edly to cycle from one Main Page to another.

1. With the GPSMAP 60CSx On, press and  

  release the POWER key to display the  

  Backlight Adjustment Slider.
2. Press and release the POWER key to  

  increase the brightness level.
3. To close, press the ENTER key. 
The backlight is factory set to timeout in 15 

seconds, unless connected to an external power 
source. Refer to Display Setup in the Owner’s 
Manual to change the timeout period. 

Satellite Page -  Provides reference for satellites being tracked.
Trip Computer Page -  Provides trip and navigation data. 
Map Page -  Displays a map and references your movements. 
Compass Page -  Provides guidance to a destination.       
Altimeter Page -  Provides tracking of elevation and pressure. 
Main Menu -  A directory of advanced features and settings.

Satellite 

Page

Trip Computer 

Page

Map 

Page

Compass 

Page

Main 

Menu

D-Ring

Altimeter

Page

Altimeter and Compass Calibration

 To calibrate the Electronic Compass and Altimeter, see the 

Owner’s Manual. 

The MicroSd Card used for storing detailed 

mapping data is located beneath the 

batteries. Refer to the Owner’s Manual for 

detailed information.

Satellite signal 

strength bars