Garmin 60cs Manuale Proprietario

  Highlight “Stop Navigation” and press ENTER to stop navigat-

ing.

  The “Bearing Pointer” is the factory set default option. When the 

“Bearing Pointer” option is displayed, the “Course Pointer” is 

active and vice versa. Highlight this option and press 

ENTER to 

activate.

The Bearing Pointer and Course Pointer work independently of each 

other, one indicating the direction to your destination and the other, your 
relationship to a course line leading to the destination.

For example: If the Bearing Pointer arrow is pointing straight up, you 

are going directly to your destination. If it points any direction other than 
up, turn towards that direction until the arrow is pointing up and then 
continue in that direction. The Bearing Pointer always points to the des-
tination, no matter what direction you are moving. Most efficient if you 
must move around obstacles (lakes, private property, etc.) in your path.

 If you are using the “Course Pointer” option instead and you drift 

away from the line of travel from your original location to your destina-
tion, the Course Deviation Indicator (arrow with horizontal dotted line) 
provides graphic indication of drift (right or left) according to the scale 
displayed at the edge of the compass ring. Move to the right or left to get 
back on course. Most efficient if you are navigating on water or where 
there are no major obstacles in your path. It also helps you avoid hazards 
to either side of the course such as shoals or submerged rocks.

0.25

 mi

The Course Pointer indicates your course of travel from 

your original location and the distance off course.

The Bearing Pointer always indicates the direction to 

your destination from your current location.

Scale