Garmin 60cs Manuale Proprietario

Interfacing the GPSmap 60CS

The GPSmap 60CS is provided with interface connection to a PC 
using either a serial port or USB connector cable. Connection to your 
computer is necessary for downloading of detailed map from Garmin 
MapSource Map Data CDs. You can also save routes, waypoints, and 
tracks from the GPSmap 60CS to MapSource. Refer to the MapSource 
User’s Guide provided with your MapSource CDs.
To connect to your computer using the USB connector:
1. Install the MapSource Trip and Waypoint Manager CD-ROM provided 

with your GPSmap 60CS on your PC.  USB drivers, required for USB 
interfacing, are installed when you run the CD-ROM. Do not connect 
the USB cable until the drivers have been installed.

2. Lift the USB protective cover from the back of the GPSmap 

60CS and insert the smaller connector on the USB cable into 
the matching port.

3. Connect the remaining cable end to your PC USB port.
To connect to your computer using a Serial Port connector:
1. Lift the Serial Port protective cover from the back of the 

GPSmap 60CS and insert the round indexed connector on the  
cable into the matching port.

2. Connect the remaining cable end to your PC Serial port or other 

appropriate device.

3. Set your GPSmap 60CS interface setting to the appropriate 

interface format. Refer to Interface Setup on page 56.

Universal Serial 

Bus (USB) Port

Serial 

Communications 

Port

Lift Cover

Lift Cover