Garmin 65 Guida Utente
GPS
Communications
Failure
GPS HDOP Position Error
When the HDOP for the GPS sensor exceeds current
flight phase HDOP requirements, a warning is
generated and Nav data will be flagged as invalid.
The current flight phase is displayed first (either
Terminal or En route). Approach warnings are for the
GX50/60 only. Messages become an old message after
viewing.
When the HDOP for the GPS sensor exceeds current
flight phase HDOP requirements, a warning is
generated and Nav data will be flagged as invalid.
The current flight phase is displayed first (either
Terminal or En route). Approach warnings are for the
GX50/60 only. Messages become an old message after
viewing.
Terminal
GPS HDOP
Position Error
Parallel Track/Approach Conflict (GX50/60 Only)
This message appears when the current parallel track
conflicts with the selected approach.
This message appears when the current parallel track
conflicts with the selected approach.
PTK - Approach
conflict. Press
ENT to stop PTK
Enable Approach (GX50/60 Only)
This message is generated when an approach is
loaded, but not enabled.
This message is generated when an approach is
loaded, but not enabled.
Press ENTER to
Enable Approach
Approach Enabled Too Late (GX50/60 Only)
When an approach is enabled too close to the FAF
waypoint, the following message is created.
When an approach is enabled too close to the FAF
waypoint, the following message is created.
Abort Approach
Approach Enabled
< 2nm from FAF
8-6
Message Function